Products
How to test the starter?

The starter motor can be tested without fitting to the car, and this will find problems like me putting the solenoid in upside-down.
you will need a battery and some jumper leads.
first connect the leads to your battery, and then the negative lead to the case of the starter.
Test 1 checking the motor.
connect the positive lead to the bottom terminal on the solenoid this should make the motor spin, at high speed.
Test 2  checking the solenoid.
connect the positive lead to the small terminal on the solenoid this should make the pinion slide out and engage the ring gear. (this is when I noticed the solenoid up side down as it failed to do this)
 Test 3. checking both motor and solenoid.
connect the positive lead to the top terminal on the solenoid. The starter motor should do nothing it shouldn't  spark or click. Connect another positive  lead to the small terminal on the solenoid the starter should fire up throwing the pinion out and spinning the motor.

  • Mrs Sky Wen
    Email: sky@motor-starter.com
    Wechat: 254090599 QQ: 1691015499.
    MB & Whatsapp: 0086- 159 9501 9527

    Address: B1-704 Wanda Plaza, Wujin District, Changzhou City, Jiangsu Province, China

  • Copyright (c) 2017 - 2020 | WebMap | XmlMap